With regards to the most essential system in your house, the electrical system ranks at the top of the list. In case you recognize it or not, the electrical system plays a major role. Actually, it’s quite difficult for you to even think about doing a single daily activity within you home without electricity.
Do you deal with wiring at your home? Well, homeowners should never mess with the wiring in their home itself. Always prefer a specialized Electrician while doing this kind of task. When the electrical system is working well in the house, wiring in your house is undetectable. However, when the wiring turns to go bad, issues go inconspicuously.
The main reason is that encompassing the electrical wiring isn’t a DO-IT-YOURSELF work. It needs to be performed only by a certified electrician as they are well-trained in electricity. They give you an assurance of your safety and their property as well. They possess the installation and troubleshooting tools which you don’t have at your home. Also, you don’t have the expertise to handle it.
Here are the things which you must consider. Let’s check it out!!!
Switches & Outlets Don’t Work Properly
With the switches and outlets in your home, you can tap the flow of electricity into your home. These things might go wrong because of the wear and tear over time. When such things stop working, never attempt to pull them out and fix the issue on your own. Even the simplest task like this is hazardous if you are not sure about what you’re actually doing. So, prefer a professional electrician for getting the job done.
Constant Tripping of Breakers
Most of the modern homes are established with modern circuit breakers and this has replaced the old-fashioned fuse box. A modern circuit breaker is designed in such a manner that it holds 15-amp breaker for greater protection in the rooms. But, most of the homeowners replace the original breakers with the 20-amp breakers. This might be a serious mistake as a 20 amp breaker is designed for major equipment’s and not for the everyday use. Placing the wrong breaker enables the overload to occur without tripping the breaker. Also, this increases the overheating risk and possibly the fire.
As a result, tripping of a circuit breaker and turning off the circuit automatically becomes common. When this occurs, you have to put the switch back in its position. In case the circuit breaker frequently trips, this means that circuit breaker gets overloaded and exceeds its safety capacity.
Ground Fault Circuit Interrupters (GFCI)
GFCI is needed by a code wherever electrical currents get in touch with the ground or else it’s situated near the running water. Such types of tools will save your and your family’s life as it prevents you from the deadly shocks. The modern GFCIs comprise in-built testers and need to be tested at regular intervals. In case one of yours is functioning accurately, it will result in faulty GFCI. Most importantly, this must be the result of the faulty or wrong wiring.
Dimming or Flickering Lights
This is the most common issue found in the older homes, particularly the one that’s furnished with modern appliances, like desktop computers and microwave ovens. At times, a flickering lamp results in serious concern. You need to test the fixture or a lamp in an outlet. However, in the case, fixture or lights regularly flickers; then this is a serious problem of wiring. You can contact a certified electrician for determining whether any repair or upgrade is required for your electrical system.
Faulty Cables or Damaged Wires
Frayed or damaged wires or faulty cable splices are dangerous fire hazards and the sign of a substandard electrical job. Most of the people don’t notice this problem. In case, any kind of electrical work is being performed by an unlicensed electrician, you can correct and review that work by a certified Electrical Contractor.
Aluminum wiring is a major concern. In contrast to the copper wiring, aluminum wiring increases and contracts because of the seasonal temperature changes resulting in the fire hazard and loose connections. In case your home has aluminum, replace it. In case this job seems to be costly for you, you must have all the connections with the copper wiring.
Your home equipment’s consume a lot of power. This is not an issue until you have an equipment outlet which doesn’t work as it needs to be. In case you see any sparking in equipment when you plug it in, immediately will turn off the breaker and call an expert. Also, you can unplug the appliance when you pull on the cord. Remember, don’t touch the outlet or plug.
Leaving out the electrical concerns untended in your house is very hazardous. So, you should know when your system needs some attention. It’s better to consult an Electrical Contractor for handling any type of electrical issue for getting the job safely done.